[ts-7000] MAX232 and TS-7400 - HELP

["lhamaduck" <>]

Hi, 

I'm using a MAX232N to convert TTL signal to RS232. MAX232 supply is 3.3V and 
made this connection between max232 and TS-7400

TS-7400           MAX              DB9
TX (pin7) -> pin11 - pin14  ->  RX (pin2)
RX (pin8) -> pin12 - pin13  ->  TX (pin3)
                                GND(pin5)

I just checked the signal in all pins...and I think that is ok, but in the 
hyper terminal anything was showed.

There is any pins to do a connections?...to do the LINUX boot?

Thanks

bruno



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/