Jim Jackson wrote:
>> I'm using a null cable, and I just try change the RX and TX pins in the
>> DB9 connector, but same happens.
> Have you got hyper terminal configured right? I've never used it, but have
> seen indications that it can be problematic. Try testing the hyper terminal
> setup to some known good rs232 connection, but only connect rx/tx and
> ground. Once you know hyper terminal is running/configured correctly you
> know the problem is with your ts7400 setup.
Another thing about HyperTerminal by default turns on flow control, it
really assumes a modem is connected. AFAIK you'll have to turn off flow
control completely to work with the TS7400.
--
Jason Stahls
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|