Re: [ts-7000] MAX232 and TS-7400 - HELP

Are you using a null modem cable or straight through serial cable?

--- On Sun, 9/6/09, lhamaduck <> wrote:

From: lhamaduck <>
Subject: [ts-7000] MAX232 and TS-7400 - HELP
To:
Received: Sunday, September 6, 2009, 2:41 AM

 

Hi,

I'm using a MAX232N to convert TTL signal to RS232. MAX232 supply is 3.3V and made this connection between max232 and TS-7400

TS-7400 MAX DB9
TX (pin7) -> pin11 - pin14 -> RX (pin2)
RX (pin8) -> pin12 - pin13 -> TX (pin3)
GND(pin5)

I just checked the signal in all pins...and I think that is ok, but in the hyper terminal anything was showed.

There is any pins to do a connections? ...to do the LINUX boot?

Thanks

bruno

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___