--- In Jason Stahls <> wrote:
>
> j.chitte wrote:
> > However , I can not find out how to boot vmlinux.bin that is supplied with
> > flash_eraseall_ignoreBB. It seems that I need both the tool and the kernel.
> >
> > Can anyone enlighten me ?
>
> I'd assume the kernel will boot the TS-Linux image, if so just setup a
> nfs-root with the ts-linux image extracted on it and boot over NFS.
>
> --
> Jason Stahls
>
thanks for the reply.
That was what I assumed as well and I have a suitable nfs mount available. My
problem was actually getting vmlinux.bin to boot at all.
I tried loading it to redboot but I found no information of start address,
entry point etc. I had a couple of guesses that just locked up straight after
the redboot exec command.
I could find no information on TS site or in their "manual" (or elsewhere) as
to EXACTLY what to do with a kernel in that form.
So my question was quite literally how to boot vmlinux.bin
thanks
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|