--- In "yanzickp1" <> wrote:
>
> You can re-image the SD card by downloading the latest filesystem image from
> Technologic and with a reader use the 'dd' command to rewrite it.
>
You may also want to take an image of the card as-is, before you write the new
image, if you want to poke around to see what happened.
regards, ........ Charlie
>
> --- In "pattykirsch" <kirsch@> wrote:
> >
> > I came in this morning to find my ts7800 board not responding over the
> > network, so I rebooted the system. Still nothing, so I hooked up to the
> > serial console and rebooted again. The bootloader starts, then there's a
> > message about inittab can't be found. It asks for a runlevel but whatever
> > I try it just says no more processes at that runlevel and then no more
> > prompt even. I had been booting from/to the sd card, and obviously it's
> > gotten quite hosed. So I pulled the jumper to make it boot from the
> > nand... but it's still trying to boot to the sd card and exhibiting the
> > same behavior.
> >
> > Is there something I'm missing to get it booting to the fastboot at least?
> > Or some easy way to reimage the sd card? I don't have anything that can't
> > be easily recreated on there. Thanks.
> >
> > Patty Kirsch
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|