You can re-image the SD card by downloading the latest filesystem image from
Technologic and with a reader use the 'dd' command to rewrite it.
--- In "pattykirsch" <> wrote:
>
> I came in this morning to find my ts7800 board not responding over the
> network, so I rebooted the system. Still nothing, so I hooked up to the
> serial console and rebooted again. The bootloader starts, then there's a
> message about inittab can't be found. It asks for a runlevel but whatever I
> try it just says no more processes at that runlevel and then no more prompt
> even. I had been booting from/to the sd card, and obviously it's gotten
> quite hosed. So I pulled the jumper to make it boot from the nand... but
> it's still trying to boot to the sd card and exhibiting the same behavior.
>
> Is there something I'm missing to get it booting to the fastboot at least?
> Or some easy way to reimage the sd card? I don't have anything that can't be
> easily recreated on there. Thanks.
>
> Patty Kirsch
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|