I came in this morning to find my ts7800 board not responding over the network,
so I rebooted the system. Still nothing, so I hooked up to the serial console
and rebooted again. The bootloader starts, then there's a message about
inittab can't be found. It asks for a runlevel but whatever I try it just says
no more processes at that runlevel and then no more prompt even. I had been
booting from/to the sd card, and obviously it's gotten quite hosed. So I
pulled the jumper to make it boot from the nand... but it's still trying to
boot to the sd card and exhibiting the same behavior.
Is there something I'm missing to get it booting to the fastboot at least? Or
some easy way to reimage the sd card? I don't have anything that can't be
easily recreated on there. Thanks.
Patty Kirsch
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|