--- In "j.chitte" <> wrote:
>
> --- In Jason Stahls <jason@> wrote:
> >
> > j.chitte wrote:
> > > zImage is the default target for make here so make zImage is the same as
> > > make. Hence when you try make zImage afterwards it correctly tells you it
> > > has nothing to do. It's already done it.
> > >
> > > normally to build the kernel image you just type make.
> >
> > Do redboot or bootloader support bzImage?
> >
> >
> > --
> > Jason Stahls
> >
>
> redboot needs vmlinux.
>
No, it may work with vmlinux, but it also works with zImage. From my earlier
post:
>>I load development kernels via http:
>>load -v -r -b 0x218000 -h 192.168.2.1 -m http /~ccm/zImage-2.6.29-rc6
I do append the version to the filename, but the format is zImage.
regards, ............ Charlie
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|