--- In "j.montornes" <> wrote:
>
> Hello Naresh,
>
> about your questions:
> 1) I applied the entire set of patches.
> 2) I didn't change anything. The default options (ts7200-defconfig) worked
> well for me to start. I leave fine tunning for future ...
> 3a) With zImage you get an smaller image, because it's compressed (I think
> that using zlib)
> 3b) I don't remember the exact message, but when I compiled using the
> default cross compiler, I get an error message, so it could be only a problem
> with the compiler that you used. I used the crosstool for linux 2.6 available
> on the ftp of embeddedarm.com.
> 4) I'd like know the answer, but unfortunately I only have one TS-7250 :-(
>
> Regards,
> -Jordi Montornés-
>
> --- In naresh raga <naresh_raga@> wrote:
> >
> > hello montrones and charlie,
> > I have followed your guidelines.I have some doubts regarding this.
> > 1)What patches exactly should we apply from
> > linux-2.6.27.4-ts7200_matt-4?There are many patches in this folder and
> > subfolder patchset.
>
> > 2)Also after running menuconfig what exact options should we change in
> > menuconfig.
> > 3)Montornes said make zImage but charlie said simply make.Which one should
> > I follow?Also When I am trying make zImage,its prompting nothing has to be
> > done for zImage.
> > 3)I have applied linux-2.6.27.4-ts7200_matt-4.patch.But when I ran make,I
> > ended up with the error:
> > advansys_get_sense_buffer_dma This driver is still not properly converted
> > to the DMA API.
> > Implicit declaration of function dma_cache_sync.
> > 4)Finally,Whether the new kernel will work for TS-7300?My interest is to
> > have 2.6 kernel on TS-7300.
> >
> > Please help me out.
> >
> > Thanks,
> > Naresh.
> >
>
zImage is the default target for make here so make zImage is the same as make.
Hence when you try make zImage afterwards it correctly tells you it has nothing
to do. It's already done it.
normally to build the kernel image you just type make.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|