ts-7000
[Top] [All Lists]

Re: [ts-7000] Re: Upgrading kernel version to 2.6 in TS-7250

To:
Subject: Re: [ts-7000] Re: Upgrading kernel version to 2.6 in TS-7250
From: naresh raga <>
Date: Fri, 8 May 2009 21:53:50 +0530 (IST)


Thanks montornes...

--- On Fri, 8/5/09, j.montornes <> wrote:

From: j.montornes <>
Subject: [ts-7000] Re: Upgrading kernel version to 2.6 in TS-7250
To:
Date: Friday, 8 May, 2009, 3:22 PM

Baiscally I've followed the steps described by Charlie in order to get 2.6.27.4 running using nfs filesystem. These are my steps:

1- Download the kernel source version 2.6.27.4 (ftp.kernel. org) and apply the patch linux-2.6.27. 4-ts7200_ matt (available on Files section of this mailing list)

2- Compile the kernel:
1- edit the Makefile, in order to set variables ARCH (arm) and CROSS_COMPILE (i.e.:/usr/local/ opt/crosstool/ arm-none- linux-gnueabi/ bin/arm-none- linux-gnueabi- )
2- make ts7200-defconfig (it comes with patch file)
3- make oldconfig
4- make zImage

3- Create a filesystem for the TS-7250 (for example, downloading the filesystem from ftp://ftp.embeddeda rm.com/images/ tslinux/ts7250- 32-default and untaring it)

4- Create the dev entries required to boot (without them, a message telling that Unable to open initial console will appear):
cd $FILESYSTEM/ dev
test -e console || sudo mknod console c 5 1
test -e ttyAM0 || sudo mknod ttyAM0 c 204 16
test -e null || sudo mknod null c 1 3

5- set the network configuration in the file $FILESYSTEM/ sysconfig/ ifcfg-eth0 (to avoid that init scripts modify my network configuration and nfs connection was lost)

6- load the kernel in the board (I use bootload):
1- go to the folder with the compiled kernel image zImage (using NFS)
2- insmod bootloader.o -f
3- bootload zImage -c "console=ttyAM0, 115200 ip=192.168.0. 124 init=/sbin/init nfsroot=192. 168.0.10: /arm-nfs"

Regards,
-Jordi Montornes-



Now surf faster and smarter ! Check out the new Firefox 3 - Yahoo! Edition * Click here!

__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___
<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU