Hi Kevin --
--- In "kvnherrera" <> wrote:
>
> Hi there,
>
> I'm having problems with my TS-ADC24. To be precise, I can't turn the ADC
> machine on. I use the library, but it doesn't work, and I can't find the
> reason. I don't know if I must wire it in some fashion or if I must move a
> special register.
>
> To describe more the problem, I fully boot my TS-7800, then I load the
> library. When done that I can use the commands on it. like adc_status, or
> adc_dly. But when I try adc_start, the adc machine stays on 0. Every and each
> of the other registers respond, only this doesn't. I even do some reading on
> the Fifo, and when I do that, I can see the green LED blinking and it gives
> me some reading (the problem is that it's wrong)
OK, simple questions first:
* Have you downloaded the latest version of tsadclib?
* Check the PC-104 baseaddress (in tsacdlib). Should be 0xEE000000 for ts7800
* How have you set the jumpers?
* What does adc_status actually return?
* Have you checked and set all of the analog input settings you want, like
SE/Diff and input range? Are the correct values returned when you query them?
regards, ......... Charlie
>
> The only thing that seems to work when I do an adc_start is that the FIFO
> stack becomes fully populated again.
>
> can someone give me advice?
>
> Kevin H.
>
> pd. yes I have tried pc104on and it doesn't work.
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|