Hi there,
I'm having problems with my TS-ADC24. To be precise, I can't turn the ADC
machine on. I use the library, but it doesn't work, and I can't find the
reason. I don't know if I must wire it in some fashion or if I must move a
special register.
To describe more the problem, I fully boot my TS-7800, then I load the library.
When done that I can use the commands on it. like adc_status, or adc_dly. But
when I try adc_start, the adc machine stays on 0. Every and each of the other
registers respond, only this doesn't. I even do some reading on the Fifo, and
when I do that, I can see the green LED blinking and it gives me some reading
(the problem is that it's wrong)
The only thing that seems to work when I do an adc_start is that the FIFO stack
becomes fully populated again.
can someone give me advice?
Kevin H.
pd. yes I have tried pc104on and it doesn't work.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|