--- In Matthew Harrell
<> wrote:
>
> > The only thing that seems to work when I do an adc_start is that the FIFO s=
> > tack becomes fully populated again.
>
> If you're telling it to start and the FIFO then becomes full then it
> seems to be working fine. By default the timing between readings is
> something like a microsecond if I remember right. If it fills up
> the FIFO then it's started reading and done enough scans to fill it
> up and then it stops again. The cycle would then be for you to read
> the values, start it over, and so on.
>
> You probably want to fiddle with the timing between scans, single
> versus differential settings and so on
>
I think that maybe you're right,the only thing is that I keep reading weird
numbers, for example if I connect it to 0V I read a 2095. Do I need to wire
something in order to read 0 with 0V, or why am I getting this behavior?
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|