> The only thing that seems to work when I do an adc_start is that the FIFO s=
> tack becomes fully populated again.
If you're telling it to start and the FIFO then becomes full then it
seems to be working fine. By default the timing between readings is
something like a microsecond if I remember right. If it fills up
the FIFO then it's started reading and done enough scans to fill it
up and then it stops again. The cycle would then be for you to read
the values, start it over, and so on.
You probably want to fiddle with the timing between scans, single
versus differential settings and so on
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|