Re: [ts-7000] Re: TS7260 with 2.6.21-ts: Unlink after no-IRQ? IOGEAR GWU523

["Jordi Soucheiron" <>]

I don't think that's a power suply problem. If I boot from 2.4 it works. If I boot from 2.6 without having loaded the scsi and usb modules on the 2.4 works too

2008/10/30 Larry <>

How much current does this thing draw?
I had a similar problem with a PCMCIA wireless device on the TS5500 card.
It turned out that there was a power glitch when the PCMCIA device was powered up.


jordixou wrote:

I have the same problem when I try to bootload a kernel 2.6 and I have
the usb modules loaded in the default kernel in a ts7400 board.
Have you solved it?

--- In ts-7000%40yahoogroups.com, "gajans.garage" <> wrote:
>
> Hi,
>
> I'm running my TS7260 with the 2.6.21-ts. Everything works fine until
> I insert my usb wireless adapter and reboot. The system freezes during
> reboot.
>
> -ep93xx-ohci ep93xx-ohci: Unlink after no-IRQ? Controller is probably
> using the wrong IRQ.
>
> Is the last message it gives.
>
>
> I have tried:
> 1. irqpoll in the boot options
> 2. Have tried booting using the tftp instead of bootload which I
> normally use
>
> I would appliciate on any help
>
> Thank you
> Gajan
>

No virus found in this incoming message.
Checked by AVG. 
Version: 7.5.549 / Virus Database: 270.8.5/1755 - Release Date: 10/29/2008 5:27 PM
  

-- 
Jordi Soucheiron
Software Engineer

DEXMA
Riu de l'Or 35, ES-08034, Barcelona
t:/f: +34 93 280 19 18
www.dexmatech.com



__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___