[ts-7000] Re: TS7260 with 2.6.21-ts: Unlink after no-IRQ? IOGEAR GWU523

["gajans.garage" <>]

Dear AR,

Thank you for your quick response.

I'm using an AC/DC (5V-3.0A) adapter as power supply. And the with 2.4
kernel the GWU523 works fine. 

Is there anything that I should check ?

Thank you 
Gajan




--- In  Angel Rodriguez <> wrote:
>
> Hello gajans.garage,
> 
> Check your power supply and make sure that during the boot process
it does not drop below the min volts when the USB is brought up.
> 
> AR
> 
> Monday, October 13, 2008, 6:26:24 AM, you wrote:
> 
> > Hi, 
> 
> > I'm running my TS7260 with the 2.6.21-ts. Everything works fine until
> > I insert my usb wireless adapter and reboot. The system freezes during
> > reboot. 
> 
> > -ep93xx-ohci ep93xx-ohci: Unlink after no-IRQ?  Controller is probably
> > using the wrong IRQ.
> 
> > Is the last message it gives. 
> 
> 
> > I have tried:
> > 1. irqpoll in the boot options
> > 2. Have tried booting using the tftp instead of bootload which I
> > normally use
> 
> > I would appliciate on any help 
> 
> > Thank you
> > Gajan
>



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/