Hello gajans.garage,
Well, I had the same symptom as you and when I tracked it down that is what it
was. If it work under 2.4 it's probably not the power supply.
Good luck
Angel
Monday, October 13, 2008, 8:59:19 AM, you wrote:
> Dear AR,
> Thank you for your quick response.
> I'm using an AC/DC (5V-3.0A) adapter as power supply. And the with 2.4
> kernel the GWU523 works fine.
> Is there anything that I should check ?
> Thank you
> Gajan
> --- In Angel Rodriguez <> wrote:
>> Hello gajans.garage,
>> Check your power supply and make sure that during the boot process
> it does not drop below the min volts when the USB is brought up.
>> AR
>> Monday, October 13, 2008, 6:26:24 AM, you wrote:
>> > Hi,
>> > I'm running my TS7260 with the 2.6.21-ts. Everything works fine until
>> > I insert my usb wireless adapter and reboot. The system freezes during
>> > reboot.
>> > -ep93xx-ohci ep93xx-ohci: Unlink after no-IRQ? Controller is probably
>> > using the wrong IRQ.
>> > Is the last message it gives.
>> > I have tried:
>> > 1. irqpoll in the boot options
>> > 2. Have tried booting using the tftp instead of bootload which I
>> > normally use
>> > I would appliciate on any help
>> > Thank you
>> > Gajan
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|