[ts-7000] TS-7350 - TS-VIDCORE

To:
Subject:	[ts-7000] TS-7350 - TS-VIDCORE
From:	"tmoraes10" <>
Date:	Mon, 13 Oct 2008 18:29:02 -0000

I want to know what the possibilities of modifying the TS-VIDCORE to
adapt the PC-104 output to VGA output. Because I need to use VGA
output to connect with monitor and the ts-7300 is very expensive for
my project.

Anybody help me?

Thanks 
Regards 
Thiago


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] TS-7350 - TS-VIDCORE, tmoraes10 <= [ts-7000] kernel 2.6.24.4 for TS-72XX [take9], Matthieu Crapet

Previous by Date:	Re: [ts-7000] TS7800 Interrupts, Jeff Weaver
Next by Date:	Re: [ts-7000] Re: TS7260 with 2.6.21-ts: Unlink after no-IRQ? IOGEAR GWU523, Angel Rodriguez
Previous by Thread:	[ts-7000] TS7260 with 2.6.21-ts: Unlink after no-IRQ? IOGEAR GWU523, gajans.garage
Next by Thread:	[ts-7000] kernel 2.6.24.4 for TS-72XX [take9], Matthieu Crapet
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU