ts-7000
[Top] [All Lists]

Re: [ts-7000] Re: TS7260 with 2.6.21-ts: Unlink after no-IRQ? IOGEAR GWU

To:
Subject: Re: [ts-7000] Re: TS7260 with 2.6.21-ts: Unlink after no-IRQ? IOGEAR GWU523
From: Larry <>
Date: Thu, 30 Oct 2008 06:45:25 -0500
How much current does this thing draw?
I had a similar problem with a PCMCIA wireless device on the TS5500 card.
It turned out that there was a power glitch when the PCMCIA device was powered up.


jordixou wrote:

I have the same problem when I try to bootload a kernel 2.6 and I have
the usb modules loaded in the default kernel in a ts7400 board.
Have you solved it?

--- In .com, "gajans.garage" <gajans.garage@...> wrote:
>
> Hi,
>
> I'm running my TS7260 with the 2.6.21-ts. Everything works fine until
> I insert my usb wireless adapter and reboot. The system freezes during
> reboot.
>
> -ep93xx-ohci ep93xx-ohci: Unlink after no-IRQ? Controller is probably
> using the wrong IRQ.
>
> Is the last message it gives.
>
>
> I have tried:
> 1. irqpoll in the boot options
> 2. Have tried booting using the tftp instead of bootload which I
> normally use
>
> I would appliciate on any help
>
> Thank you
> Gajan
>


No virus found in this incoming message. Checked by AVG. Version: 7.5.549 / Virus Database: 270.8.5/1755 - Release Date: 10/29/2008 5:27 PM
__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___
<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU