[ts-7000] TS-7300 fpga code

["jwsincla99999" <>]

I recently acquired a TS-7300 and downloaded the fpga code from
the opencore website. Attempting to build the core using the free web-
based quartus II software gives many warnings and the following 
errors:

Error: Can't place pins assigned to pin location Pin_1 (IOC_X0_Y18_N0)
        Info: Pin sdram_data_pad[1] is assigned to pin location Pin_1 
(IOC_X0_Y18_N0)
        Info: Pin ~ASDO~ is assigned to pin location Pin_1 
(IOC_X0_Y18_N0)
Error: Can't place pins assigned to pin location Pin_2 (IOC_X0_Y18_N1)
        Info: Pin sdram_data_pad[2] is assigned to pin location Pin_2 
(IOC_X0_Y18_N1)
        Info: Pin ~nCSO~ is assigned to pin location Pin_2 
(IOC_X0_Y18_N1)
Error: Can't place pins assigned to pin location Pin_108 
(IOC_X34_Y2_N0)
        Info: Pin sd_wprot_pad is assigned to pin location Pin_108 
(IOC_X34_Y2_N0)
        Info: Pin ~LVDS54p/nCEO~ is assigned to pin location Pin_108 
(IOC_X34_Y2_N0)
Info: Fitter preparation operations ending: elapsed time is 00:00:00
Error: Can't fit design in device
Error: Quartus II Fitter was unsuccessful. 4 errors, 1 warning
        Error: Peak virtual memory: 209 megabytes
        Error: Processing ended: Thu Oct 02 15:23:47 2008
        Error: Elapsed time: 00:00:04
        Error: Total CPU time (on all processors): 00:00:03
Error: Quartus II Full Compilation was unsuccessful. 6 errors, 98 
warnings

Any guidance?



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/