[ts-7000] ts-7400 and linux 2.6.x kernel?

["gchiii2006" <>]

Does anybody have a NAND driver that works the same as the 2.4 kernel?

after booting to the 2.6.21 kernel when I try to mount /dev/mtdblock3
I don't get the same files that I get when I mount partition 3 using
the 2.4 kernel.  
(I am using the tsprosoft.c code because it appears to parse the
partition table just like in the 2.4 driver, but this doesn't seem to
be helping)  also the driver appears to only use software ecc whereas
the 2.4 driver seems to use hardware ecc, is this ok?


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/