Re: [ts-7000] ts-7400 and linux 2.6.x kernel?

[Pradip De <>]

Hi,
Did you compile the 2.6.21 kernel or have you used an image available on the website somewhere? If so, could you let me know which image you used and the steps you followed to successfully load the kernel? I tried recompiling the 2.6.21 kernel and load it using the bootload utility but am getting errors. It would be helpful if you could let me know the details.
thanks,
Pradip

----- Original Message ----
From: gchiii2006 <>
To:
Sent: Monday, September 29, 2008 7:41:03 AM
Subject: [ts-7000] ts-7400 and linux 2.6.x kernel?

Does anybody have a NAND driver that works the same as the 2.4 kernel?

after booting to the 2.6.21 kernel when I try to mount /dev/mtdblock3
I don't get the same files that I get when I mount partition 3 using
the 2.4 kernel.
(I am using the tsprosoft.c code because it appears to parse the
partition table just like in the 2.4 driver, but this doesn't seem to
be helping) also the driver appears to only use software ecc whereas
the 2.4 driver seems to use hardware ecc, is this ok?

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___