Re: [ts-7000] TS7400:Recompile 2.6 Kernel

["Jordi Soucheiron" <>]

I've done it. The problem is that although is possible to load the kernel it's not possible to load the sd module on boot time (I haven't succeeded at least).
I got the croostool named: crosstool-linux26-3.4.4-2005q3-2 and the 2.6.21 kernel from embeddedarm website.
I modified the Makefile pointing to the crosstol dir.
make 72xx_defconf
make menuconfig (or xconfig)
make
Now you should have the kernel image and be able to load it. If you find out how to load the sd filesystem without a nfs please explain it.
Good luck

2008/9/29 Pradip De <>

Hi,
If somebody has successfully recompiled kernel 2.6.21 and loaded it on the TS7400, could he/she please provide a howto in terms of the steps taken to do that?
If I have debian on the sdcard and wish to load using kernel 2.6, what are the modifications needed to the linuxrc (if any)?
thanks,
Pradip

--
Jordi Soucheiron
Software Engineer

DEXMA
Riu de l'Or 35, ES-08034, Barcelona
t:/f: +34 93 280 19 18
www.dexmatech.com

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___