|
Hi, I did that but still failed to load it. Did you use the bootload utility to boot from this kernel? If so, could you tell me the kernel command line you used? Are you facing a problem with loading the correct driver for the sdcard? Well, I got the tssdcard.ko driver from the website which is probably the one for the 2.6.21 kernel. However, I am still not being able to boot to it. I am also trying to use the filesystem from the sd card and not nfs. thanks, Pradip ----- Original Message ---- From: Jordi Soucheiron <> To: Sent: Monday, September 29, 2008 1:05:53 AM Subject: Re: [ts-7000] TS7400:Recompile 2.6 Kernel I've done it. The problem is that although is possible to load the kernel it's not possible to load the sd module on boot time (I haven't succeeded at least).
I got the croostool named: crosstool-linux26- 3.4.4-2005q3- 2 and the 2.6.21 kernel from embeddedarm website. I modified the Makefile pointing to the crosstol dir. make 72xx_defconf make menuconfig (or xconfig) make Now you should have the kernel image and be able to load it. If you find out how to load the sd filesystem without a nfs please explain it. Good luck 2008/9/29 Pradip De <m("ymail.com","pradipde");" target="_blank" href=""> com>
-- Jordi Soucheiron Software Engineer DEXMA Riu de l'Or 35, ES-08034, Barcelona t:/f: +34 93 280 19 18 www.dexmatech. com m("dexmatech.com","jsoucheiron");" target="_blank" href="">jsoucheiron@ dexmatech. com __._,_.___
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |