ts-7000
[Top] [All Lists]

RE: [ts-7000] Re: TS-7400 tsuart insmod fails

To: "" <>
Subject: RE: [ts-7000] Re: TS-7400 tsuart insmod fails
From: Jayne Dickinson <>
Date: Mon, 30 Jun 2008 08:36:56 -0700
Here's my tty results...

$ cat /proc/tty/driver/ttyAM*
serinfo:1.0 driver revision:
0: uart:AMBA port:00000000 irq:52 tx:3593 rx:93 RTS|DTR
1: uart:AMBA port:00000000 irq:54 tx:0 rx:0
2: uart:AMBA port:00000000 irq:55 tx:0 rx:0 CTS|DSR|CD
$ cat /proc/tty/driver/ttyTS*
cat: /proc/tty/driver/ttyTS*: No such file or directory

As you can see I do not have /dev/ttyTS0 built-in to the default TS-7400 flash 
boot...

I checked the TS7400 FTP sites...been reading all the TS docs religiously....
I feel like I need to RMA this TS-7400 since it's not working out of the box 
for me....
I really am frustrated.

Jayne
________________________________________
From:   On Behalf Of David 
Farrell 
Sent: Monday, June 30, 2008 7:50 AM
To: 
Subject: [ts-7000] Re: TS-7400 tsuart insmod fails

Jayne,

I use ttyAM2 but I have the ENC-420 board which breaks out all
three.

cat /proc/tty/driver/ttyAM%d
On my TS-7400 shows three ports with good metrics.

cat /proc/tty/driver/ttyTS%d
On my TS-7400 shows one port but garbage for metrics.

David.

--- In <ts-7000%40yahoogroups.com>, Jayne 
Dickinson <> wrote:
>
> Don't I need to install a tsuart driver for UART2 to become /dev/ttyS0 ?
> I went ahead and did the mknod /dev/ttyS0 -c 234 0 and did
/etc/init.d/tsuart and still get this error
> $ more /tmp/tsuart.out
> Using tsuart
> insmod: not an ELF file
> insmod: Could not load the module: Success
>
>
> Yes this is the fastboot ...and I am not using the TS-9441 card, nor
the sdcard for anything other than
> a filesystem for storage....
>
> examining dmesg....I never see TS-UART in the list..
>
>
> here's the result of dmesg and no mention of /dev/ttyTS0 being
installed....hmmmm
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU