Let me add.
>From TS-linux
stty -F /dev/ttyTS0 ospeed 38400
then cat /dev/ttyTS0 will dump my GPS data to the screen.
David.
--- In "David Farrell" <> wrote:
>
> Jayne,
>
> I retested, please disregard my previous post. My application does
> indeed use ttyTS0 for the third port. The /proc/tty/driver/ttyTS%d
> metrics are junk. Maybe the TS driver does not implement them?
>
> Plus I'm using debian.
>
> David.
>
>
>
> --- In "David Farrell" <davidjf2001@> wrote:
> >
> > Jayne,
> >
> > I use ttyAM2 but I have the ENC-420 board which breaks out all
> > three.
> >
> > cat /proc/tty/driver/ttyAM%d
> > On my TS-7400 shows three ports with good metrics.
> >
> > cat /proc/tty/driver/ttyTS%d
> > On my TS-7400 shows one port but garbage for metrics.
> >
> > David.
> >
> >
> >
> > --- In Jayne Dickinson <jayned@> wrote:
> > >
> > > Don't I need to install a tsuart driver for UART2 to become
> /dev/ttyS0 ?
> > > I went ahead and did the mknod /dev/ttyS0 -c 234 0 and did
> > /etc/init.d/tsuart and still get this error
> > > $ more /tmp/tsuart.out
> > > Using tsuart
> > > insmod: not an ELF file
> > > insmod: Could not load the module: Success
> > >
> > >
> > > Yes this is the fastboot ...and I am not using the TS-9441 card, nor
> > the sdcard for anything other than
> > > a filesystem for storage....
> > >
> > > examining dmesg....I never see TS-UART in the list..
> > >
> > >
> > > here's the result of dmesg and no mention of /dev/ttyTS0 being
> > installed....hmmmm
> > >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|