Jayne,
I retested, please disregard my previous post. My application does
indeed use ttyTS0 for the third port. The /proc/tty/driver/ttyTS%d
metrics are junk. Maybe the TS driver does not implement them?
Plus I'm using debian.
David.
--- In "David Farrell" <> wrote:
>
> Jayne,
>
> I use ttyAM2 but I have the ENC-420 board which breaks out all
> three.
>
> cat /proc/tty/driver/ttyAM%d
> On my TS-7400 shows three ports with good metrics.
>
> cat /proc/tty/driver/ttyTS%d
> On my TS-7400 shows one port but garbage for metrics.
>
> David.
>
>
>
> --- In Jayne Dickinson <jayned@> wrote:
> >
> > Don't I need to install a tsuart driver for UART2 to become
/dev/ttyS0 ?
> > I went ahead and did the mknod /dev/ttyS0 -c 234 0 and did
> /etc/init.d/tsuart and still get this error
> > $ more /tmp/tsuart.out
> > Using tsuart
> > insmod: not an ELF file
> > insmod: Could not load the module: Success
> >
> >
> > Yes this is the fastboot ...and I am not using the TS-9441 card, nor
> the sdcard for anything other than
> > a filesystem for storage....
> >
> > examining dmesg....I never see TS-UART in the list..
> >
> >
> > here's the result of dmesg and no mention of /dev/ttyTS0 being
> installed....hmmmm
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|