Jayne,
I use ttyAM2 but I have the ENC-420 board which breaks out all
three.
cat /proc/tty/driver/ttyAM%d
On my TS-7400 shows three ports with good metrics.
cat /proc/tty/driver/ttyTS%d
On my TS-7400 shows one port but garbage for metrics.
David.
--- In Jayne Dickinson <> wrote:
>
> Don't I need to install a tsuart driver for UART2 to become /dev/ttyS0 ?
> I went ahead and did the mknod /dev/ttyS0 -c 234 0 and did
/etc/init.d/tsuart and still get this error
> $ more /tmp/tsuart.out
> Using tsuart
> insmod: not an ELF file
> insmod: Could not load the module: Success
>
>
> Yes this is the fastboot ...and I am not using the TS-9441 card, nor
the sdcard for anything other than
> a filesystem for storage....
>
> examining dmesg....I never see TS-UART in the list..
>
>
> here's the result of dmesg and no mention of /dev/ttyTS0 being
installed....hmmmm
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|