Re: [ts-7000] Re: AD converter TS-7250

[Per Öberg <>]

Hi,

>
> Make sure it's output range goes as close to zero as you need.
 >

i.e. look for a Rail-to-Rail OP with low output swing. I've been looking
at some Rail-to-Rail OP's and they typically go down to 250-350 mV when
powered with V+=5 and V-=0 Volts. If that isn't enough you may have to
use V-<0 to get what you need.

Regards
Per Öberg

--
Per Öberg, Ph.D. Student
Address: Division of Vehicular Systems
Department of Electrical Engineering
Linköpings universitet
581 83 Linköping, SWEDEN
Phone: +46 (0)13-28 23 69
e-mail: 
PGP: http://www.fs.isy.liu.se/~oberg/0x61984A9D.asc

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
    
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

oberg.vcf
Description: Vcard