--- In "osmicadu" <> wrote:
>
> Thanks everybody,
>
> Another question I have is:
>
> When i start adc_7250 it gives me the values of all five channels
on
> my board being 1.666 V. Should I be able to measure this voltage
with
> a voltmeter on these channels because when I try I get nothing.
Also
> if I would connect a power source at lets say 2.5 volts should I be
> able to read that with adc_7250 on one of the channels.
>
> thank you all
>
you should look at the documentation for the board. One of pdf files
on the TS site covers this.
most ppl get confused by way this looks at first.
in any case you really need to read up on all this before doing any
serious work on the board.
if you have other problems I suggest you post actual commands and
output , not chatty comments like "it gives me..." . That will enable
others to give accurate help without trying to guess what you may
have done.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|