Hello,
I have a question about AD converter on TS-7250.
On my board I don't have a real time clock and the only adc I have is
the 5 channel one that comes originally with the board. What I would
like to do is to simply connect a sensor to my board which gives
values from 0-3V and to convert it on one channel on my TS-7250 so
that I can transport it through a network to my PC.
Now is this possible whit out the real time clock on my board because
I have to read the sensor same every 5 seconds. Also is it problematic
to set it up on the 5 channel adc that originally comes with the board.
Any comments and recommendations are welcome.
thank you all.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|