>> I just downloaded the source, configured it using the busybox configure
>> stuff and rebuilt. You can find out which utilities are built into the
>> existing BB, just by executing busybox with no parameters. I add extra
>> stuff. The process is outlined on my ts7200 page
>>
> Thanks for that link, I'd read that a while back but forgot it
> covered BB.
>
> I went through the config process last night but there are a lot of
> options apart from the actual commands. In view of the importance of
> getting it right I did not feel much like just accepting defaults on
> the one's where I was not sure which way to jump.
>
> Could you post your .config ? This would be at least a known good
> starting point.
I didn't think it was that complicated, certainly simpler than doing the
config for the kernel :-)
Anyway I've attached the requested .config for busybox-1.00-rc3
which is pretty old.
cheers
Jim
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
.config
Description: Text document
|