[ts-7000] Re: DIO are set to "output" on startup TS-7200, how to change

["minulescu" <>]

> 
> It seems that the DIO pins are set on 3.3V at boot time, after all.
> Has someone find a way to eliminate this?
> 
> Thanx,
> Razvan
>

Yah, I'm going to change what I said once again. The DIO pins are set 
at 3.3V on startup indeed. When I rechecked the outputs and came up 
with 0V, I forgot the fact that I was turning them off initially 
in /etc/rc.c/rcS.sysinit.

But like I already said in the initial post, this takes 3-4 seconds 
to deactivate them, so I don't know if that's good enough for you 
Razvan.. probably not.

Thus, I too, am still looking for a solution to this.
Sorry for all the confusion.

-Minulescu



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/