[ts-7000] TS7KV ADC

ts-7000

[ts-7000] TS7KV ADC

To:
Subject:	[ts-7000] TS7KV ADC
From:	"aju.mathew" <>
Date:	Wed, 27 Feb 2008 04:46:53 -0000

Hello,

I am using TS7260 with TS7KV Board with ADC. I need assistance to read
the signal through ADC. It will be a great help for me if someone can
send a sample code to read the ADC on TS7KV.

Thanks & Regards

Aju



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] TS7KV ADC, aju.mathew <= Re: [ts-7000] TS7KV ADC, Zombi process

Previous by Date:	patch to 2.6.21-ts ethernet code, Andrew Taylor
Next by Date:	[ts-7000] Re: DIO are set to "output" on startup TS-7200, how to change, minulescu
Previous by Thread:	patch to 2.6.21-ts ethernet code, Andrew Taylor
Next by Thread:	Re: [ts-7000] TS7KV ADC, Zombi process
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU