[ts-7000] DIO are set to "output" on startup TS-7200, how to change

["minulescu" <>]

For the purposes of my application, I need the DIO pins to output 0V on 
startup of the TS-7200. I assumed this would be the case, but was 
surprised when I measured the output voltage and it is 3.3V on startup.

Is there a way to have the DIO pins output 0V on startup ? 

I tried making this modification in the software .. sysinit .. but it 
takes the board about 3-4 seconds to load the contents of sysinit and 
sets the pins to "0", thus those pins are outputting 3.3V for that 
time, which are a hindrance to me.

Thanks in advance!

-minulescu



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/