[ts-7000] Re: DIO are set to "output" on startup TS-7200, how to change

["Razvan Ionut Stoian" <>]

--- In  Triffid Hunter <> wrote:
>
> On Sun, 24 Feb 2008, minulescu wrote:
> 
> > Turns out I was not thinking straight at all last night.. sorry to
> > confuse everyone.. I was measuring the voltage of perhaps one of the
> > SPI pins.. I looked at the schematic backwards. The DIO's initial
> > outputs are 0V.
> >
> > Thanks for everyone's input and help.
> 
> Thanks for the follow-up, now we all know to check that :)
>

It seems that the DIO pins are set on 3.3V at boot time, after all.
Has someone find a way to eliminate this?

Thanx,
Razvan



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/