To: | |
---|---|
Subject: | [ts-7000] Help please TS-7200 Problem |
From: | "cottojavier" <> |
Date: | Tue, 19 Feb 2008 16:29:36 -0000 |
Hi, I have a TS-7200 And, I have a serious problem when connect the AC power... I can not communicate by COM 1 to a ANSI Terminal using a null modem cable. (Jumper 2, 115200, etc...) I can not communicate by COM 2. (Jumper 2 and 4, 115200, etc...) If I can ping the IP from the console (Port ethernet,using crossover cable),but, can not do telnet, can not do ftp. As checking the hardware and revise this good??? What can I do? Thank everyone for the help Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/ts-7000/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/ts-7000/join (Yahoo! ID required) <*> To change settings via email: <*> To unsubscribe from this group, send an email to: <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [ts-7000] Re: TS-7260 2.6 lost UDP packets, charliem_1216 |
---|---|
Next by Date: | [ts-7000] Re: Help please TS-7200 Problem, charliem_1216 |
Previous by Thread: | [ts-7000] compile program on board, nasim751 |
Next by Thread: | [ts-7000] Re: Help please TS-7200 Problem, charliem_1216 |
Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU