Hi Oliver --
--- In Oliver Martin <> wrote:
>
> Hello,
>
> we are experiencing lots of dropped UDP packets on our TS-7260 in 2.6.
> Using 2.4, everything is working fine. In 2.6, iperf reports (depending
> on bandwidth used) up to 50% dropped packets. Neither ifconfig nor
> /proc/net/dev show any errors or lost packets, though.
> Has anybody experienced similar network problems with 2.6?
>
> Thanks for any ideas,
> Oliver
>
Could be a duplex mismatch? There is a patch on linux-netdev [1] that
changes ep93xx_eth.c to use phylib and properly tell the MAC about
full duplex. I see it's not in 2.6.23; don't know about 2.6.24.
Can you give a short recipe / script to duplicate the problem?
You probably want to post this to linux-netdev list.
Regards, ........ Charlie
[1] http://marc.info/?l=linux-netdev&m=119520642207001&w=4
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|