ts-7000
[Top] [All Lists]

[ts-7000] Re: Problem booting

To:
Subject: [ts-7000] Re: Problem booting
From: "saint_sley" <>
Date: Tue, 19 Feb 2008 16:12:10 -0000
--- In  Triffid Hunter <> wrote:
>
> On Fri, 15 Feb 2008, victorp_27 wrote:
> 
> > hi everyone, i have a problem with my TS7800 and TS7KV.
> >
> > I installed the console kit for
> >
debian(ftp://ftp.embeddedarm.com/ts7kv/ts7kv-debian-console-kit.tar.gz)
> > in debian(of the SD CARD). I extracted  everything (tar zxvf
> > ts7kv-tslinux-console-kit.tar.gz -C /) and after i rebooted and
> > started debian (SD CARD), I got the problem:
> >
> > init: Id "0" respawning too fast: disabled for 5 minutes."
> > init: Id "1" respawning too fast: disabled for 5 minutes."
> >
> > Could anybody help me, please?
> 
> You don't have a /dev/ttyS0, symlink ttyAM0 to it. Same with
ttyS1/ttyAM1. 
> Alternatively, edit /etc/inittab and replace one with the other.
> 
> Those messages are caused by init being told to restart the gettys
if they 
> exit, but since they can't find the devices you've told them to use,
they 
> exit immediately, and init realises that they're broke, gives up for a 
> bit and generates those messages.
>


Hi everyone, i'm having the same problem that victor, i check inittab
and dev/ttyS0 is change to ttyAM0 but it doesn't work. i download
again tsscard.ko in case, if i haven't last driver, but nothing
happen. on the other hand i have ts-7250, meanwhile it's starting
debian, it load a "ts-7kv modules" that ts-7800 doesn't load. Also
ts-7kv green led is on when i turn on ts-7250. what am i doing wrong?
what are ts-7kv modules for?

TS-7800:
- it's working with kernel 2.6 on a SDcard memory.

TS-7250
- it's working with kernel 2.4 on USB memory.


When i'm using TS-7250 i can't run debian on screen, i think is making
conflit with USB keyboard driver.


PD: on documentation says that JP1 on TS-7800 can be use for booting
from SDcard or onboard flash, however the only way that i can boot
from onboard flash is removing SD-card. if SDcard is put in place, no
matter how is JP1, it's always boot from SDcard. someone has this
problem or is just me.


Thanks in advance



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU