On Fri, 15 Feb 2008, victorp_27 wrote:
> hi everyone, i have a problem with my TS7800 and TS7KV.
>
> I installed the console kit for
> debian(ftp://ftp.embeddedarm.com/ts7kv/ts7kv-debian-console-kit.tar.gz)
> in debian(of the SD CARD). I extracted everything (tar zxvf
> ts7kv-tslinux-console-kit.tar.gz -C /) and after i rebooted and
> started debian (SD CARD), I got the problem:
>
> init: Id "0" respawning too fast: disabled for 5 minutes."
> init: Id "1" respawning too fast: disabled for 5 minutes."
>
> Could anybody help me, please?
You don't have a /dev/ttyS0, symlink ttyAM0 to it. Same with ttyS1/ttyAM1.
Alternatively, edit /etc/inittab and replace one with the other.
Those messages are caused by init being told to restart the gettys if they
exit, but since they can't find the devices you've told them to use, they
exit immediately, and init realises that they're broke, gives up for a
bit and generates those messages.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|