On Mon, January 14, 2008 9:18 am, Rob wrote:
> --- In "Rob" <> wrote:
>>
>> I start the board with the CF card installed and hit <control>c to
> enter redboot. In redboot I
>> enter:
>> fis load vmlinux
>> then
>> exec -c "console=ttyAM0, 115200 root=/dev/hda1"
>>
>> I believe I am picking up the kernel on the flash rather than the
>> one in Debian but am unsure how or why.
"fis load vmlinux" is telling redboot to load the kernel from the on-board
flash. You will need to replace this command with a command to load the
kernel from the CF card.
______ Best Regards,
|__ __/ Michael Schmidt
|| Software Engineer
||echnologic Systems (EmbeddedARM.com)
|| (480) 16610 East Laser Drive #10
|/ 837-5200 Fountain Hills, AZ 85268
http://oz.embeddedarm.com/~michael
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|