I start the board with the CF card installed and hit <control>c to enter
redboot. In redboot I
enter:
fis load vmlinux
then
exec -c "console=ttyAM0, 115200 root=/dev/hda1"
I believe I am picking up the kernel on the flash rather than the one in Debian
but am unsure
how or why.
>
> How are you booting? It sounds like you are picking up an old kernel
> version? What does dmesg say about the booted kernel version?
>
> Could you try to load the kernel by tftp or http? give it a new
> filename, so you are sure you are getting the file you think you are
> (my_real_ts11_kernel).
>
> Regards, ......... Charlie
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|