I'm going to adopt your strategy of using a webserver for these
listings, Dan. Anyway, here's my dmesg:
http://cunningham.homeip.net/downloads/dmesg
Note that the section with the ide stuff doesn't show up at all. We're
running the same kernel. Why wouldn't it show up? It works fine on the
ts-linux kernels, so I know the hardware is functioning properly.
--Jeff
(I'm top-posting because I can't figure out how to dismantle Yahoo's
two-column html junk so I can append at the bottom properly when using
an email client to reply with)
Daniel Smolik wrote:
>
> jcunningham63 napsal(a):
> > I was able to build it with another toolchain I built awhile ago, and
> > it boots just fine!
> >
> > Now, how do I mount the CF as an ide? There doesn't appear to be
> > /dev/ide or anything like /dev/hd* to work with.
>
> Please look at my dmesg output http://arm.mydatex.cz/TS72XX/dmesg.
> <http://arm.mydatex.cz/TS72XX/dmesg.>
> If you see in your dmesg output this lines:
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 50MHz system bus speed for PIO modes; override with
> idebus=xx
> hda: SanDisk SDCFH-32, CFA DISK drive
> ide0 at 0xc6056000-0xc6056007,0xc6078006 on irq 32
> hda: max request size: 128KiB
> hda: 62464 sectors (31 MB) w/1KiB Cache, CHS=488/4/32
> hda: hda1 hda2
> Technologic Systems TS-7200 IDE initialization - driver version 1.5,
> 12/07/07.
>
> that your dive is /dev/hda1. If you don't have /dev/hda1 file create it
> with mknod.
>
> Dan
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|