Jeff Cunningham napsal(a):
> I'm going to adopt your strategy of using a webserver for these
> listings, Dan. Anyway, here's my dmesg:
>
> http://cunningham.homeip.net/downloads/dmesg
>
> Note that the section with the ide stuff doesn't show up at all. We're
> running the same kernel. Why wouldn't it show up? It works fine on the
> ts-linux kernels, so I know the hardware is functioning properly.
You are use config shipped with kernel that I uploaded to web am I right
? There was config for my TS-7400 on which I work and ide is disabled.
Use this http://arm.mydatex.cz/TS72XX/config_TS-7200_2.6.23_mtd
copy it co /usr/src/linux-2.6.23-rc1/.config ; make and boot new kernel.
It will include IDE support built in.
Dan
>
> --Jeff
>
> (I'm top-posting because I can't figure out how to dismantle Yahoo's
> two-column html junk so I can append at the bottom properly when using
> an email client to reply with)
>
>
>
> Daniel Smolik wrote:
>> jcunningham63 napsal(a):
>>> I was able to build it with another toolchain I built awhile ago, and
>>> it boots just fine!
>>>
>>> Now, how do I mount the CF as an ide? There doesn't appear to be
>>> /dev/ide or anything like /dev/hd* to work with.
>> Please look at my dmesg output http://arm.mydatex.cz/TS72XX/dmesg.
>> <http://arm.mydatex.cz/TS72XX/dmesg.>
>> If you see in your dmesg output this lines:
>> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>> ide: Assuming 50MHz system bus speed for PIO modes; override with
>> idebus=xx
>> hda: SanDisk SDCFH-32, CFA DISK drive
>> ide0 at 0xc6056000-0xc6056007,0xc6078006 on irq 32
>> hda: max request size: 128KiB
>> hda: 62464 sectors (31 MB) w/1KiB Cache, CHS=488/4/32
>> hda: hda1 hda2
>> Technologic Systems TS-7200 IDE initialization - driver version 1.5,
>> 12/07/07.
>>
>> that your dive is /dev/hda1. If you don't have /dev/hda1 file create it
>> with mknod.
>>
>> Dan
>>
>
>
>
>
> Yahoo! Groups Links
>
>
>
--
Mydatex s r.o.
http://www.mydatex.cz
email:
mob: 604200362
tel: 226210085
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|