Hello,
> What kind of a bus interface do we have between ARM processor and the
> FPGA on the TS 7300 ?
It's a multiplexed bus, you can take a look at the schematic for
information on the pinout. You can refer to the open core for a reference...
http://www.opencores.org/projects.cgi/web/ts7300_opencore/overview
--
Best Regards,
________________________________________________________________
Eddie Dawydiuk, Technologic Systems | voice: (480) 837-5200
16610 East Laser Drive Suite 10 | fax: (480) 837-5300
Fountain Hills, AZ 85268 | web: www.embeddedARM.com
> --- In Eddie Dawydiuk <> wrote:
>> Hello,
>>
>>> What kind of synthesis tool can I use for the FPGA on TS 7300 ?
>>> I was checking & couldn't find anything free from Altera.
>> Altera provides Quartus II Web Edition for free, this is the
> synthesis
>> tool used by Technologic Systems...
>>
>>
> https://www.altera.com/support/software/download/altera_design/quartus
> _we/dnl-quartus_we.jsp
>> --
>> Best Regards,
>> ________________________________________________________________
>> Eddie Dawydiuk, Technologic Systems | voice: (480) 837-5200
>> 16610 East Laser Drive Suite 10 | fax: (480) 837-5300
>> Fountain Hills, AZ 85268 | web: www.embeddedARM.com
>>
>>
>>> --- In "PeterElliot" <egroups@> wrote:
>>>> --- In "bibhu" <bibhu_420@> wrote:
>>>>> Peter,
>>>>>
>>>>> If I loose the SVGA output because of reprogramming the
>>>> FPGA,
>>>>> can't I get it back ?
>>>>>
>>>>> Also, can't I have my program along with the image or
>>>> whatever that
>>>>> is already in the FPGA ?
>>>>>
>>>>> Didn't TS came out with some utility for FPGA programming?
>>>>>
>>>>> Bibhu
>>>>>
>>>> Hi Bibhu,
>>>>
>>>> If you load a custom FPGA file you will loose the SVGA code.
>>>> If you reload the TS file the SVGA will come back.
>>>>
>>>> The only way to keep the TS functions is to pay TS to combine
>>>> their code with yours... I understand TS is looking into a way
>>>> to allow this on the TS-7800.
>>>>
>>>> Regards,
>>>>
>>>> PJE
>>>>
>>>
>>>
>>>
>>>
>>> Yahoo! Groups Links
>>>
>>>
>>>
>>>
>>>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|