Peter,
If I loose the SVGA output because of reprogramming the FPGA,
can't I get it back ?
Also, can't I have my program along with the image or whatever that
is already in the FPGA ?
Didn't TS came out with some utility for FPGA programming?
Bibhu
--- In "PeterElliot" <> wrote:
>
> Bibhu,
>
> If you reprogram the FPGA you loose the SVGA output...
>
> There are a number of C to FPGA compilers, but they cost $$$$$$$$
>
> I don't know your application, but I'd either use pre-decoded
images,
> or decode them in the background and cache the resulting images in
> memory or on the SD card.
>
> Regards,
>
> PJE
>
>
> --- In "bibhu" <bibhu_420@> wrote:
> >
> >
> > Hi,
> >
> > Has anybody tried running C code on the FPGA ? I have a lot of
> questions
> > with respect to it. :)
> >
> > I was trying to do a JPEG decompression (jpeg-bmp conversion)
using
> > djpeg.exe(94,605 bytes). It takes close to 15 seconds.
> >
> > So I was wondering if I could do something to make it faster ?
> >
> > Hacking the code to get optimization is very difficult since I am
> not
> > into image processing. :)
> >
> > Regards,
> >
> > Bibhu
> >
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|