What kind of a bus interface do we have between ARM processor and the
FPGA on the TS 7300 ?
--- In Eddie Dawydiuk <> wrote:
>
> Hello,
>
> > What kind of synthesis tool can I use for the FPGA on TS 7300 ?
> > I was checking & couldn't find anything free from Altera.
>
> Altera provides Quartus II Web Edition for free, this is the
synthesis
> tool used by Technologic Systems...
>
>
https://www.altera.com/support/software/download/altera_design/quartus
_we/dnl-quartus_we.jsp
>
> --
> Best Regards,
> ________________________________________________________________
> Eddie Dawydiuk, Technologic Systems | voice: (480) 837-5200
> 16610 East Laser Drive Suite 10 | fax: (480) 837-5300
> Fountain Hills, AZ 85268 | web: www.embeddedARM.com
>
>
> > --- In "PeterElliot" <egroups@> wrote:
> >> --- In "bibhu" <bibhu_420@> wrote:
> >>> Peter,
> >>>
> >>> If I loose the SVGA output because of reprogramming the
> >> FPGA,
> >>> can't I get it back ?
> >>>
> >>> Also, can't I have my program along with the image or
> >> whatever that
> >>> is already in the FPGA ?
> >>>
> >>> Didn't TS came out with some utility for FPGA programming?
> >>>
> >>> Bibhu
> >>>
> >> Hi Bibhu,
> >>
> >> If you load a custom FPGA file you will loose the SVGA code.
> >> If you reload the TS file the SVGA will come back.
> >>
> >> The only way to keep the TS functions is to pay TS to combine
> >> their code with yours... I understand TS is looking into a way
> >> to allow this on the TS-7800.
> >>
> >> Regards,
> >>
> >> PJE
> >>
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|