To: | |
---|---|
Subject: | [ts-7000] Re: booting linux 2.6.?? on ts-7260 |
From: | "kmoore37918" <> |
Date: | Fri, 09 Nov 2007 17:46:40 -0000 |
--- In "Martin Guy" <> wrote: > > 2007/11/8, kmoore37918 <>: > > go, but crosstool doesn't seem to support EABI yet) > > It most certainly does, and the patches went into crosstool-0.43! well, I did "find . -type f -print | xargs grep -i eabi" and found nothing. and I have tried to hack my own config but so far haven't had success at getting a working toolchain. > You'll find suitable .dat files and notes here > http://freaknet.org/martin/crosstool > and there are prebuilt EABi crosscompilers thereunder too thanks for those. that will save me a lot of time. Keith Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/ts-7000/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/ts-7000/join (Yahoo! ID required) <*> To change settings via email: <*> To unsubscribe from this group, send an email to: <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ |
Previous by Date: | Re: [ts-7000] Re: has anyone managed to get SD working with linux 2.6?, Eddie Dawydiuk |
---|---|
Next by Date: | Re: [ts-7000] Re: Running C code on FPGA, Eddie Dawydiuk |
Previous by Thread: | Re: [ts-7000] Re: booting linux 2.6.?? on ts-7260, Martin Guy |
Next by Thread: | Re: [ts-7000] Re: booting linux 2.6.?? on ts-7260, Christopher Friedt |
Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU