> It sounds as though the kernel image you're using hasn't even had some
> of the basic patches necessary to run the 2.6 kernel, which is why the
> 8MB thing seems to work.
>
> i.e. Breton Saunder's Physmap patch...
>
> Why don't you just scrap the kernel you're using, keep the filesystem,
> but use one of the tried and tested kernels that I and many others have
> already been using for months? (years?)
maybe I missed it, but I didn't find a downloadable compiled kernel
that had the memory map patch built in. and of the kernels people
offered, it wasn't always clear which ts-72xx models they would work
with -
I gather that not all of them have the weird memory map?
and anyway, the mem= hack was able to map in enough memory (32MB) so that
I could get a kernel compiled natively from source, and of course I
did apply
all of the recommended patches to that kernel. I just wanted a
pre-compiled
kernel and root file system so I could avoid having to set up a cross
toolchain
and try to get all of those details right. (e.g. EABI seemed like the
way to
go, but crosstool doesn't seem to support EABI yet)
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|