Re: [ts-7000] Re: Serial port i/o voltage

[Jim Jackson <>]

On Tue, 17 Jul 2007, Jeff Cunningham wrote:

> I've been having some issues with COM2 on a TS-7200 board. Does this
> also apply to the TS-7200?

If you want your application to control "com2" you have to stop init from
spawning a getty on the line, yes.

>
> Angel Rodriguez wrote:
> >
> > Hello BillBergeron,
> >
> >
> > I think by default both coms are configured as console ports. Comment
> > out in /etc/inittab the line
> >
> >
> > lgn1:12345:respawn: /sbin/getty -L 115200 ttyAM1
> >
> >
> > then com2 will come up a a normal serial port
> >
> >
> > Angel
> >
>
>


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/